How To Drift ?
How to Drift, Step by Step Instructions
For many car enthusiasts out there, the question of how to drift is highly important. Although drifting is very enjoyable and exciting, to be able to succeed in your drift attempts, the dynamics of the vehicle should be well-adjusted and there are certain points that the driver should pay attention to while driving.
Basics of How to Drift
Being able to drift won’t be easy, especially at the beginning. The more you drift, the more experience it will be possible to gain. There are different methods for drifting, but in principle, paying attention to the following points will allow you to drift successfully;
- When reaching a curve, apply the brakes to transfer the weight of the vehicle to the front and turn the steering wheel in the opposite direction of the curve to start drifting.
- At this point, the angle of slip should be kept low, otherwise, you will be spinning and not drifting. For this, step on the gas a bit more.
- Continue to steer in the opposite direction without changing the direction of the steering wheel, and then take your foot off the throttle after the middle of the bend.
- Pull your foot off the throttle at the right moment and loosen the steering wheel.
These steps basically answer the question “how to drift“. But there are certain points you need to pay attention to before you start and while driving.
Where to Find a Good Place to Drift?
Places to drift should be large areas away from traffic and crowd. Drifting on roads with traffic or in areas with pedestrians is extremely dangerous. That’s why you should be practicing drifting in a place away from pedestrians and vehicles. It is not necessary to have curves to drift, an area where the vehicle can turn may be provided by using traffic cones.
Which Vehicles Are Better For Drifting?
For a successful drift, one should be paying attention to know which cars are better for drifting For example, drifting is not possible with vans or trucks, or even if it is tried, it will not end with the desired result. Sports cars are ideal for drifting because they are more likely to swing their body front. However, this also makes it harder to control sports cars. Additionally, it is also better if the vehicle to drift has a manual gear.
The First Step To Drift
The thing you should know on the first step of how to drift is that it is easy to start slipping. However, for vehicles that do not have very high power, more needs to be done than just pushing the gas. It is very important to enter the curve with the right speed, so approach the curve quickly and brake to take the weight from the rear-end. At this stage, turn the steering wheel slightly. The most important point for a good drift is to transfer the weight of the vehicle correctly. When braking, the suspension in front of the vehicle becomes active and the rear end of the vehicle starts to be lifted. In this case, you can think of the front part ↓ and rear part as ↑.
There is more pressure in the front tires and the rear tires will be at a higher position in terms of gripping. This point is very important for drifting because, for a good drift, the rear of the vehicle must have a low grip. So you have to brake before the curve and turn the steering wheel towards the corner when the front of the vehicle is lowered and the rear is rather lighter. Accordingly, the rear-end will start to pivot in the opposite direction. But while doing these, you push the brake lightly or turn the steering wheel sensitively, the car will be thrown from the front and the car will turn very quickly, which does not count as drift. That’s why you need to pay utmost attention to getting all the things right.
Things To Do To Maintain The Drift
When asking the question of How to drift, one should know that it is also of great importance to be able to maintain this situation after starting to drift. Which is in fact the most fun part of the action. It is highly satisfying to drive the vehicle with the steering wheel turned completely sideways. If you take your foot off the throttle once the drift started, you will lose drifting acceleration, but pushing too much on the gas will cause the vehicle to skid. Therefore, you should make the correct gas setting, not more and not less, in order to maintain the acceleration of the vehicle correctly.
It is very important to keep the rev high, especially in manual gear vehicles. From this aspect, manual gear vehicles are more suitable for drifting. If there is no gear limiting feature in automatic gear vehicles, the vehicle will accelerate while pressing the gas which will end the drift, but you can easily ensure that the rev is high in manual gear vehicles. The gas is important for drifting and includes the correct adjustment of this setting according to the speed of the vehicle.
Resuming the Drift at Different Angles
Once the drift is started, it can be maintained for a very long time. Especially entering different bends without disrupting the drift is the most challenging part of the action. Since everything develops very quickly while in drift, one should be paying attention that the vehicle is well-controlled. Those who are just starting to drift can only drift in shorter times, drifting for a long time and entering different bends while drifting requires more practice. In this case, the bends should be taken very smoothly.
For example, if you entered the bend by drifting from the right and then you will enter the left bend by drifting, then you need to pull your foot off the gas a bit. This will prevent the rear tires from gripping the road quickly and preventing the vehicle from rolling in the opposite direction. The steering wheel must be allowed to turn automatically while changing direction because it is impossible to adjust the rotation speed of the steering wheel by hand. If you get the right angle when you enter the curve, you can start controlling the steering wheel again. But after gripping the bend, the gas adjustment must be made again. If you have started the direction change correctly, you can complete taking the curve by stepping on the gas.
Ending the Drift in a Controlled Way
The last step of the answer of how to drift, ending the drift, is not very easy. Pushing on the brake suddenly or taking your foot off the gas may result in the car skidding, reverse or even tackle. Therefore, the drift angle of the vehicle should be maintained and you should take your foot off the gas very slowly. At this stage, the steering wheel should be brought back to the straight position, again, slowly. While doing these, the rear wheels will grip the road and the drift will then be completed successfully.
It is recommended to take the necessary safety precautions before drifting. The mentioned drift methods are for expert drivers. Incorrect drifting can lead to terrible results. Therefore, maximum care should be given for taking the necessary safety precautions to drift.